BZZMV - DEVRAN 229 MEDIUM GREEN BASE, 229B5506
- MSDS: BZZMV
- Manufacturer: DEVOE COATINGS CO
- Product Name: DEVRAN 229 MEDIUM GREEN BASE, 229B5506
- National Stock Number: 8010-00N008875
Product Identification
Product ID:DEVRAN 229 MEDIUM GREEN BASE, 229B5506
MSDS Date:05/10/1990
FSC:8010
NIIN:00N008875
MSDS Number: BZZMV
Responsible Party
LOUISVILLE, KY 40207
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 502-897-9861
Cage: 1HK86
Contractor
Telephone: 502-897-9861
Cage: 1HK86
Ingredients
APPRVD CHEM/MECH FILTER DESIGNED TO REMOVE
RTECS: 9999999ZZ
AREAS, WEAR NIOSH/MSHA APPRVD AIR SUPP RESP/USE
RTECS: 9999999ZZ
WELDING, BRAZING AND SANDING MATERIAL COATED WITH
RTECS: 9999999ZZ
STDS IN MIX, APPLICATION & CURING AREAS & TO REMOVE
RTECS: 9999999ZZ
WELDING & FLAME CUTTING ON SURF COATED W/THIS PROD.
RTECS: 9999999ZZ
REMOVING HEAVY SOLVENT VAPORS FROM LOWER LEVELS OF
RTECS: 9999999ZZ
SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (HIGH FLASH
CAS: 64742-94-5
RTECS: WF3100000
Fraction By Weight: 10%
OSHA PEL N/K
ACGIH TLV: N/K
4.2 LD50 (ORAL RAT)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: <5%
OSHA PEL 100 PPM
ACGIH TLV: C 50 PPM, S
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ACETIC ACID, 2-METHOXY-1-METHYLETHYL ESTER; (PROPYLENE
CAS: 108-65-6
RTECS: AI8925000
Fraction By Weight: 10-15%
OSHA PEL N/K
ACGIH TLV: N/K
> 5 G/KG
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 15%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM/150STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
513.13 G/L
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
ITS RESIDUE MAY IGNITE. DURING EMERGENCY
RTECS: 9999999ZZ
HEALTH HAZARD. SYMPTOMS MAY NOT BE IMMEDIATELY
RTECS: 9999999ZZ
ASPIRATION OF VOMITUS CAN CAUSE CHEMICAL
RTECS: 9999999ZZ
DELIBERATELY CONCENTRATING AND INHALING THE
RTECS: 9999999ZZ
ABSORBENT AND NON-SPARKING TOOLS. STORE IN
RTECS: 9999999ZZ
OF VAPS BY MAINTAINING CONTINUOUS FLOW OF FRESH
RTECS: 9999999ZZ
LGE QTYS IN BLDGS TO COMPLY W/OSHA 1910.106. KEEP
RTECS: 9999999ZZ
TO BOTTLES/OTHER UNLABELLED CONTRS. DO NOT REUSE
RTECS: 9999999ZZ
PROD, THEN MIX OF BASE & CONVERTER PORTIONS WILL
RTECS: 9999999ZZ
THIS PROD CONTAINS CHEM KNOWN TO STATE OF
RTECS: 9999999ZZ
ACRYLIC RESIN
CAS: 29354-73-2
Fraction By Weight: 20%
OSHA PEL N/K
ACGIH TLV: N/K
> 15 G/KG
CAS: 7727-43-7
RTECS: CR0600000
Fraction By Weight: 20%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
3) CR2O3
CAS: 1308-38-9
RTECS: GB6475000
Fraction By Weight: <5%
OSHA PEL 1 MG/M3 (MFR)
ACGIH TLV: 0.5 MG/M3 TWA AS CR
BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (EPOXY RESIN)
CAS: 25068-38-6
RTECS: SL6475000
Fraction By Weight: 10-15%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: IRRIT OF RESP TRACT.
HDCH, NAUS, DIZZ, WEAK & FATG. EXTREME EXPOS CAN RSLT IN UNCON &
EVEN RESP ARREST. SKIN/EYE: CAUSES IRRIT. MAY BE HARMFUL IF
ABSORBED THRU SKIN. INGEST: CAN CAUSE ST OM &/INTESTINAL IRRIT,
NAUS, VOMIT & DIARR. CHRONIC: REPORTS HAVE ASSOC RPTD & PRLNG OCCUP
OVEREXP TO (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: SOLV W/PERM BRAIN & NERV SYS DMG.
PRLNG/RPTD BRTHG OF SPRAY MIST &/SANDING DUST OVER PERIOD OF YEARS
MAY CAUSE DUST DISEASE OF LUNGS.
Medical Cond Aggravated by Exposure:NONE, WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.
First Aid
First Aid:INHAL: IF DFCLT BRTHG, MOVE TO FRESH AIR. IF CONTINUED DFCLT
BRTHG, SUMMON MED ASSIST IMMED. IF BRTHG CEASES, RESTORE USING
APPRVD CPR TECHNIQUES & SUMMON MED HELP IMMED. EYE: FLUSH IMMED
W/LGE AMTS O F WATER FOR AT LEAST 15 MIN. GET MED ASSIST. SKIN:
WASH AFFECTED AREAS W/SOAP & WATER. REMOVE SOILED CLTHG. GET MED
ASSIST IF IRRIT PERSISTS. INGEST: CONSULT MD IMMED. DO NOT INDUCE
VOMIT. (ING 12)
Fire Fighting
Flash Point Method:SCC
Flash Point:80.0F,26.7C
Lower Limits:0.8%
Extinguishing Media:USE CARBON DIOXIDE, DRY CHEMICAL, FOAM OR OTHER
NFPA APPROVED METHOD FOR TREATING A CLASS B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SUMMON PROFESSIONAL FIREFIGHTERS WATER SPRAY MAY BE INEFFECTIVE.
IF WATER IS USED, FOG NOZZ ARE (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & FLAME. VAPS MAY CAUSE FLASH FIRE. VAPS
MAY IGNITE EXPLO. VAPS MAY SPREAD ALONG DIST (SUP DAT)
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT (FLAMES, HOT SURF,
& ELEC, STATIC/FRICTIONAL SPARKS). PVNT BRTHG OF VAPS. VENT AREA.
BEFORE ATTEMPTING CLEAN-UP, REFER TO HAZ CAUTION INFO IN OTHER
SECTIONS OF THIS MSDS. C ONTAIN SPILLED MATL & REMOVE W/INERT (ING
14)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND
FLAMES. DO NOT SMOKE. DO NOT BREATHE VAPORS, SPRAY MIST OR SANDING
DUST. DO NOT GET ON SKIN, IN EYES.
Other Precautions:EXTING ALL PILOT LIGHTS & TURN OFF ALL SOURCES OF
IGNIT INCL HEATERS, FANS & OTHER NON-EXPLO-PROOF ELEC EQUIP, DURING
USE & UNTIL ALL VAPS ARE GONE. VAPS MAY IGNITE EXPLO. VAPS MAY
SPREAD LONG DIST & BEYOND CLSD DOORS. PVNT BUILD-UP(ING 15)
Exposure Controls
Respiratory Protection:WHEN SPRAY APPLIED IN OUTDOOR/OPEN AREAS &
DURING SANDING/GRINDING OPERATIONS, USE NIOSH/MSHA APPRVD MECH
FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY &
SANDING DUST. WHEN USED IN RESTR ICTED VENT AREAS WEAR
NIOSH/MSHA(ING 20)
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP AIR CONTAM CONC < CURRENT APPLIC SFTY & HLTH (ING 23)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:SOLVENT IMPERMEABLE CLOTHING AND BOOTS.
EMERGENCY EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:PREFERABLE. IF EXPOSED TO FIRE/EXTREME HEAT, WATER
SHOULD BE USED TO COOL CLSD CONTRS & PVNT PRESS BUILD-UP/POSS
AUTO-IGNIT. EXPLO HAZ:& BEYOND CLSD DOORS. DUE TO PRESS BUILD-UP,
CLSD CONTRS EXPOSED TO EXTREME HEAT MAY EXPLODE. NEVER USE
WELDING/CUTTING TORCH ON/NEAR CONTR (EVEN EMPTY) AS PROD/(ING 10)
Chemical Properties
Boiling Pt:B.P. Text:>244F,>118C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER
Percent Volatiles by Volume:59.29
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE TOX FUMES WHEN HEATED TO
DECOMP. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE, CHROMATE
COMPOUNDS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.